Differences between

Modified by Susan Riege on Aug 15, 2018
Contents
Other Related Resources
Choose Documents to Compare (Dialog)
ECO Decision (Dialog)
Engineering Change Order (Dialog)
Project Options - Comparator tab (Dialog)
Differences (Panel)

Parent page: WorkspaceManager Dialogs

The Differences between dialog

Summary

This dialog provides controls to browse through differences that have been detected between documents chosen for comparison. For each difference, you can decide whether to update one of the documents or not, ultimately creating an Engineering Change Order (ECO) in order to synchronize the documents as required.

The Synchronizer is bi-directional. This means you can specify updates to both documents in the same ECO. In order to synchronize compared documents, the aim is to determine, for each difference, whether or not to take action and in which direction the change is made - specifying which document should be updated in order to remedy the difference.

Access

The dialog is accessed after running a comparison between chosen documents in the Choose Documents To Compare dialog. The Comparator will adhere to the setup defined for it on the Comparator tab of the Project Options dialog and, if any differences are detected whose associated comparison types are not set to be ignored, those differences will appear listed in the Differences between dialog.

Options/Controls

The dialog is essentially divided into three main regions - Differences, Update and Change Order.

Differences

This region lists all differences that the Comparator has found between the chosen documents. Each difference is listed in the corresponding column for the document in which it resides. Differences are grouped by comparison type as listed and enabled on the Comparator tab of the Project Options dialog. The entry at this group level reflects the number of differences of that type.

Double-click on an entry to cross-probe to the object on the relevant source document.

Use the Expand All and Contract All commands on the right-click menu to quickly toggle the view of all differences in the listing. Alternatively, expand/contract individual comparison type groupings using the / controls to the left of each entry.
When comparing the design hierarchy of a project to its PCB document, the column for the project side will be labeled with the name of the top-level schematic sheet.

Update

This region is where you specify which document should be updated in order to remedy the difference. By default (and for safety), all difference entries initially have a decision of No Change applied to them.

Even if differences are detected, you are under no obligation to take action on them. The software will only synchronize the elements you specify.

The update decision for each difference can be individually determined by clicking on the associated entry in the Decision column then selecting the required update action in the subsequent ECO Decision dialog. In the ECO Decision dialog, choose the direction of the update (which of the compared documents to update) or No Updates at all.

The ECO Decision dialog provides indication of whether or not update in a particular direction is valid. If valid, the  and  buttons (for update to left or right, respectively) will be enabled. If a change is not supported, the corresponding button for that update direction will be grayed-out.

The right-click menu offers the following commands for quickly making update decisions:

  • << Update All in - use this command to set the update direction for all differences to the left-hand document (where applicable).
  • Update All in >> - use this command to set the update direction for all differences to the right-hand document (where applicable).
  • Reverse Direction For All - use this command to quickly reverse the update direction for all differences (where applicable). If it is not valid to change the direction for a difference, the entry will be set to No Change.
  • Set No Action For All - use this command to quickly set the update decision for all differences to No Change.
  • << Update Same Kind in - use this command to set the update direction for all differences of the same comparison type as the currently focused difference to the left-hand document (where applicable).
  • Update Same Kind in >> - use this command to set the update direction for all differences of the same comparison type as the currently focused difference to the right-hand document (where applicable).
  • Reverse Direction For Same Kind - use this command to quickly reverse the update direction for all differences of the same comparison type as the currently focused difference, where applicable. If it is not valid to change the direction for a difference, the entry will be set to No Change.
  • Set No Action For Same Kind - use this command to quickly set the update direction for all differences of the same comparison type as the currently focused difference to No Change.
  • << Update Selected in - use this command to set the update direction for all selected differences to the left-hand document (where applicable).
  • Update Selected in >> - use this command to set the update direction for all selected differences to the right-hand document (where applicable).
  • Reverse Direction For Selected - use this command to quickly reverse the update direction for all selected differences (where applicable). If it is not valid to change the direction for a difference, the entry will be set to No Change.
  • Set No Action For Selected - use this command to quickly set the update decision for all selected differences to No Change.
  • Invert Selection - use to select all differences not currently selected in the list or deselect those that are.
Multiple differences can be selected in the list using standard multi-select techniques (Ctrl+click, Shift+click).
An update in a particular direction will only be set if it is valid to do so.

Change Order

This region lists, for each difference that you decide to act upon, the action to be taken, the object affected by the action, and the document upon which the action will be carried out. It is this information that is used to compile the subsequent ECO that will be used to effect the updates. Common actions that will be listed in this area are:

  • Remove - where the update is in the direction of the document that contains the object causing the difference, the object will be removed.
  • Add - where the update is in the direction of the document that does not contain the object causing the difference, the object will be added.
  • Update - where both documents contain the same object that differs in some way, the object changed depends on the direction chosen.
If the Update Decision for a difference is No Change, there will be no action taken - as reflected in the Change Order entry No Action.

Additional Controls

  • Create Engineering Change Order - click this button to generate an ECO. The Engineering Change Order dialog will open from where you can validate and execute the updates in order to synchronize the documents.
  • Report Differences - click this button to generate a report for the differences found by the Comparator (i.e. the update decisions you have decided to make and the actions that will be included in the generated ECO). The report will be loaded into the Report Preview dialog. Use this dialog to browse the report before ultimately exporting it to one of various supported formats or printing it directly.
  • Explore Differences - click this button to investigate further the differences found by the Comparator prior to generating an ECO. The Differences between dialog will close and you will be returned to the main workspace with the Differences panel made visible. The panel will contain all of the differences listed by the Comparator and in the same categories. Use the panel to cross probe to an object responsible for a difference on its parent document.
Exploring differences in this way will cause any update decisions you have made in the Differences between dialog to be lost. You will need to open the dialog again and define updates once more, as required. Alternatively, you can cross-probe to an object directly from within the Differences between dialog. Double-click the object's entry in the Differences region of the dialog. Since the Differences between dialog remains open, it is a good idea to have the source and target documents open and the dialog placed such that your view is not obscured.

 

You are reporting an issue with the following selected text and/or image within the active document: