Schematic Print Properties
Other Related Resources
Parent page: WorkspaceManager Dialogs
The Schematic Print Properties dialog
Summary
This dialog provides controls to configure more advanced properties when printing schematic documents. It provides the ability to control whether certain design objects are included on prints or not, and also the area of the sheet that is to be printed.
Access
The dialog is accessed in the following ways:
- By clicking the Advanced button in the Schematic Print Properties dialog.
The Schematic Print Properties dialog is accessed by using the Outputs | Documentation | 
» Page Setup command from the main menus (or by right-clicking on the entry for the schematic document in the Projects panel then choosing the Page Setup command from the context menu).
» Page Setup command from the main menus (or by right-clicking on the entry for the schematic document in the Projects panel then choosing the Page Setup command from the context menu).- Right-clicking in the Print Preview dialog then choosing the Configuration command from the context menu.
The Print Preview dialog can be accessed using the Outputs | Documentation | » Print Preview command. Alternatively, access can be made by right-clicking on the respective entry for a schematic document in the Projects panel then choosing the Print Preview command from the context menu.
» Print Preview command. Alternatively, access can be made by right-clicking on the respective entry for a schematic document in the Projects panel then choosing the Print Preview command from the context menu.- With the entry for Schematic Prints selected on the Default Prints tab of the Project Options dialog (Project | Content | ), click the Configure button.
Options/Controls
Type documents
- Logical Documents - select to print logical documents.
- Physical Documents - select to print physical documents.
Drawings
Use the controls in this region of the dialog to determine whether the following objects are included in the printed outputs or not:
- No-ERC Markers with Symbols - disable this option to exclude all No ERC markers from generated prints. Enable this option to include No ERC markers. With this main option enabled, use the sub-options to fine tune the types of No ERC markers to be included, in relation to their displayed symbol types: Thin Cross, Thick Cross, Small Cross, Checkbox, and Triangle.
- Notes - disable this option to exclude all note objects from generated prints. Enable this option to include note objects. With this main option enabled, use the Include collapsed notes sub-option to control whether all notes are drawn (option enabled), or just those notes that are fully expanded (option disabled).
Area To Print
Use the controls in this region of the dialog to determine the area of the sheet to be printed. Choose from:
- Entire Sheet - print the whole schematic sheet.
- Specific Area - only print the defined area. With this option enabled, the following controls become available:
- Lower Left Corner X/Y - use these fields to define the X and Y coordinates for the bottom-left corner of the required print area.
- Upper Right Corner X/Y - use these fields to define the X and Y coordinates for the top-right corner of the required print area.
- Define - click this button to define the required print area directly in the workspace. You will be taken into the workspace, from where you can click to define the two diagonally-opposite corners of the area. The coordinates of your chosen locations will be filled into the respective fields in the Schematic Print Properties dialog.