Variant Options

Parent page: WorkspaceManager Dialogs

The Variant Options dialog

Summary

The Variant Options dialog provides controls to configure the way in which varied components are presented on the schematic sheets (which then flows through to printed or PDF outputs), and in PCB drawing type outputs, such as assembly drawings.

Access

The dialog is accessed by clicking the Drawing Style button at the bottom of the Variant Management dialog (Project | Project Actions | Variants).

Options/Controls

Schematic Drawing Options

  • Use Graphics - enable this option if you want to have graphics displayed over schematic components that are not fitted while the documents are being printed. Choose one of the following options:
    • Use Red Cross - use this option to overlay non-fitted components with a red cross.
    • Use Gray Box and Mesh - use this option to overlay non-fitted components with a gray mesh box.
  • Use Text - enable this option to display a string of characters over the not-fitted logical component.
    • Text Box - use this field to specify the text that will be overlayed on non-fitted components.
    • Font - click the color swatch to access the Choose Color dialog in which you can change the color of the overlay text. Click the Change button to access a standard font dialog in which you can change the appearance of the overlay text.
  • Modify Text and Font - enable this option to modify the appearance of varied parameters, both in the compiled document view of the schematic and in schematic prints.
    • Suffix - use this field to specify a suffix that will be added to all varied parameters.
    • Font - click the color swatch to access the Choose Color dialog in which you can change the color of the text displayed in relation to varied parameters. Click the Change button to access a standard font dialog in which you can change the appearance of the text.

PCB Drawing Options

  • Hide Not Fitted Components - enable this option to have not-fitted components excluded on generated assembly drawings.
  • Display Not Fitted Components in Draft Mode - use this option to enable the display of non-fitted components in assembly drawings in draft mode. Any combination of the following options can be enabled and configured:
    • Strike-through Designator - use this option to display the designator for a non-fitted component with a strike-through.
    • Use Graphics - enable this option to apply a graphical overlay for non-fitted components in assembly drawings. Choose one of the following options:
      • Use Cross - use this option to overlay non-fitted components with a cross.
      • Use Mesh Box - use this option to overlay non-fitted components with a mesh box.
      • Color - click the color swatch to access the Choose Color dialog in which you can change the color of the overlay cross/mesh box.
    • Use Text - enable this option to apply a textual overlay for non-fitted components in assembly drawings.
      • Text Box - use this field to specify the text that will be overlayed on non-fitted components.
      • Font - click the color swatch to access the Choose Color dialog in which you can change the color of the overlay text. Click the Change button to access a standard font dialog in which you can change the appearance of the text.
To see how the chosen options apply, ensure the preview window is set to display the component in 2D.

 

You are reporting an issue with the following selected text and/or image within the active document: