Bus Range Syntax Errors

Parent category: Violations Associated with Buses

Default report mode:


This violation occurs when the syntax of the net to which the bus is associated is specified incorrectly.


If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog), an offending object will display a colored squiggle beneath it. A notification is also displayed in the Messages panel in the following format:

Bus range syntax error <NetName> at <Location> ,


NetName is the name of the parent net to which the offending bus object is associated.

Location is the X, Y coordinates for the offending bus object's electrical hotspot.

Recommendation for Resolution

With the violation selected in the Messages panel, use the Details region of the panel to quickly cross probe to the offending net identifier (e.g., net label, port, sheet entry, etc) whose bus syntax is defined incorrectly. The correct syntax should appear in one of the following formats:

  • NetName[LowerIndex..UpperIndex]
  • NetName[UpperIndex..LowerIndex]

For example, consider a bus that carries two constituent nets, A0 and A1. The bus syntax in this case should be A[0..1] or A[1..0]. Examples of incorrect syntax would include: A[0.1], A[1-0], A[0,1], A[..1], and A[0..].


You are reporting an issue with the following selected text and/or image within the active document: