Parent page: Schematic Objects

The schematic Pin represents the physical component pin in the schematic design space.


A pin is an electrical design primitive. Pins give a component (part) its electrical properties and define the connection points on the part for the incoming and outgoing signals.


Pins can only be placed in the Schematic Library Editor. Use one of the following methods to place a pin:

  • Click Home | Place |  from the main menus.
  • Click the Add button in the Pin List region of the SCH Library panel.
  • Click the Add button in the Component Pin Editor dialog (accessed by clicking the Edit Pins button in the Library Component Properties dialog).


New pins are added to the component that is currently visible in the Schematic Library Editor. Select the required component in the SCH Library panel.

  1. Using one of the first two techniques described above, invoke the pin placement process. Note that the floating pin is held by the electrical end, which must be positioned away from the component body. Only one end of the pin is electrical and it is always this end by which the pin is held.
  2. Since there is often numerous pins on a component, it is more efficient to edit the properties of each pin as they are being placed. To do this, press Tab while the pin is floating on the cursor.
  3. Edit the pin properties as required; typically this will include at least the Display Name, Designator and Electrical Type (refer to the image of the Pin Properties dialog further down the page). Note that you can move between these fields using the Tab key to step forward or Shift+Tab keys to step backward. You can also accept the dialog settings by pressing the Enter key on the keyboard making it possible to define the dialog settings without touching the mouse.
  4. Press the Spacebar to rotate the pin if required. Rotation is counterclockwise in increments of 90 degrees.
  5. Position the pin, then click or press Enter to place the pin in the Library Editor workspace.
  6. Continue to place pins, or right-click or press Esc to terminate pin placement.

Create the Library component near the origin (center) of the Library Editor sheet, which is marked by dark cross-hair lines. Typically, a pin or the corner of the component body is placed at the sheet origin.

The pin number (Designator) must be defined since this is what is used to establish the connectivity. The Electrical Type is also important as this is used in the Schematic Editor for the Electrical Rules Check (ERC).

Adding Pins in the Component Pin Editor

Pins can also be added through the Component Pin Editor dialog, which is accessed via the Edit Pins button in the Library Component Properties dialog.

Access the Library Component Properties dialog by clicking Home | Library | Library » Component Properties. Alternatively, double-click the entry for the component in the Components region of the SCH Library panel (or select the entry then click the Edit button).

Add one or more pins in the Component Pin Editor dialog.

Click the Add button to add a new pin, then define the properties in the Component Pin Editor dialog. Note that multiple pins can be added and their properties defined; you can also use Tab and Shift+Tab to step between the fields. When you click OK to close the dialog, the new pin(s) are placed on the sheet to the bottom right of the component, ready to be positioned.

Notes on Pin Numbering

For many components there will be a series of pins that have numerical names and numbers. The auto-increment feature can be used to speed the placement of these pins. Auto-increment is invoked automatically if the pin properties are edited before placement (press Tab while the pin is floating on the cursor). The feature works for both the Designator and the Display Name - the pin Designator uses the Primary auto-increment field and the pin Display Name uses the Secondary auto-increment field. It supports incrementing alpha and numeric values, and decrementing numeric values.

Configure the Auto-increment settings on the Schematic - General page of the Preferences dialog.


Enter the Display Name and Designator pin properties.


Use the auto-increment feature to speed the placement of pins. Note the incrementing alpha pin name and decrementing numeric pin number.

Graphical Editing

To move a pin, click and hold on it - the cursor will jump to the electrical hotspot end of the pin - then move it to the new location, placing it with the electrical end away from the component body.

While dragging, the pin can be rotated (Spacebar/Shift+Spacebar) or mirrored (X or Y keys to mirror along the X-axis or Y-axis respectively).

An object that has its Locked property enabled cannot be selected or graphically edited. Double-click on the locked object directly then disable the Locked property to graphically edit the object.

Non-Graphical Editing

The following methods of non-graphical editing are available:

Via an Associated Properties Dialog

Dialog page: Pin Properties

This method of editing uses the Pin Properties dialog to modify the properties of a pin object.

The Pin Properties dialog

The dialog can be accessed during placement by pressing the Tab key.

After placement, the dialog can be accessed in one of the following ways:

  • Double-click on the placed pin object.
  • Place the cursor over the pin object, right-click then choose Properties from the context menu.

Pin Display Name & Designator - Position & Font

The location of the pin Display Name and pin Designator (number) is defined globally by the Pin Margin settings on the Schematic - General page of the Preferences dialog. This is an environment setting, meaning it applies for the PC where the setting is defined. The settings define a relative distance the text is away from the non-electrical end of the pin.

Set the distance of the pin text (Pin Margin) in the Preferences dialog.

The font used for the pin Display Name and pin Designator (number) - for a component placed on a schematic sheet - is defined at the document level in the Document Options dialog - click the Change System Font button to set it.

The default system font for a schematic library document is Times New Roman, 10pt, Regular. This is fixed and cannot be changed. When a library component is placed on a schematic sheet, this same default font is applied, but is not fixed and can be changed as required. Keep in mind that the system font used for a schematic sheet applies to other objects as well, including: Power Ports, Ports, and the X, Y region markers in the schematic sheet border.

For pins, these system-level settings of position and font can be overridden locally. Controls for customization of the position and font for a pin's Name and Designator can be found on the Logical tab of the Pin Properties dialog when editing a pin in either the Schematic Library or Schematic Editor. While the controls themselves are the same for both attributes, separate sets of controls allow them to be customized independently of each other.

The font and location of the pin Display Name and pin Designator (number) can be modified for individual pins, if required.

Use the Customize Position option to change from following the default settings for position to an overriding, customized position. For the Margin, enter a new value directly in the associated field. For the Orientation, use the drop-downs to choose the angle (0 Degrees or 90 Degrees) and the reference (Pin or Component).

The preview window will display the result of a change, so you do not need to leave the dialog until you have things just the way you want them.

Example customized positions for pin Display Name and Designator

Use the Use local font setting option to change from following the default system font, to an overriding, customized font. To do so, click on the font control to the right of the option to access the standard Font dialog. The control doubles as a notification for the font currently chosen, or 'in-force'.

Example customization of the font for a pin's Display Name

Pin Symbol Line Width

When representing a component in the schematic editing domain, each pin defined as part of that device's schematic symbol can have one or more symbols displayed. These are symbols displayed on the Inside, Inside Edge, Outside, or Outside Edge in relation to the main component symbol outline, as required. Examples might include a Clock symbol on the Inside Edge, or a Dot symbol on the Outside Edge. Such symbols greatly improve the readability of the design through visual indication of the purpose of the signal traversing a particular pin.

Use the Line Width property - available in the Symbols region of the Pin Properties dialog - to determine the width of the line used to draw these symbols. Choose from either Small or Smallest.

Via the SCHLIB Inspector Panel

Panel page: SCHLIB Inspector

The SCHLIB Inspector panel enables you to interrogate and edit the properties of one or more design objects in the active document.

You are reporting an issue with the following selected text and/or image within the active document: