Netlist Status

Modified by Susan Riege on Aug 23, 2018
Contents

Parent page: Commands

Summary

Use this command to generate a status report listing the current route length of each net in the PCB design.

Details

Click the Outputs | Reports | button on the Ribbon to generate a Netlist Status report.

When the button is clicked, an HTML report is generated and opened in CircuitStudio. The report will list each net, with the layer type on which it is routed and the total route length. Note that the vertical distance traveled through vias is not included.

Click on a net name to cross probe to that net on the PCB. Set the units required using the Units option located in the heading fields at the top of the report.

An example of the Netlist Status report.

A report with details of the route lengths can also be generated from the PCB panel when set to Nets mode. Right-click on a net then select Report from the context menu. This report will include all columns current displayed in the panel. You can configure the columns as required via the right-click Columns sub-menu. You can change the format of the report by clicking the Export button in the resulting Report Preview dialog then selecting the format in the Save as type drop-down.

You are reporting an issue with the following selected text and/or image within the active document: